Radon Mitigation
In many cases, the best way to mitigate the effects of radon in a building is by installing a radon mitigation system. The process involves proper installation by a qualified radon contractor. A reinforced plastic liner is laid over the earth floor of the building. Then, a vent pipe and fan combination is used to remove the contaminated air. This radon mitigation system is an effective way to reduce the risk of a building containing a measurable amount of radiated gas.
Testing for radon in your home is the first step in radon mitigation. However, no amount of radon is entirely safe. This is why governments set action levels for radon exposure. For example, the World Health Organization has recommended a radon level of 100 Bq/m3 in the air, and 2.7 pCi/L for the water. Although air has a greater health risk than water, the US Environmental Protection Agency doesn't recommend testing water for radon.
Radon mitigation can also be done by sealing holes and cracks in the walls. Sealing cracks in concrete blocks will not help reduce the radon levels in a home. The simplest and most cost-effective solution for this problem is to install an air-to-air heat exchanger. The system can be used to reduce radon in the air. In fact, this type of radon mitigation system is one of the most effective solutions for reducing radon levels in homes.
A radon mitigation system is usually fairly inexpensive, although it will depend on the type of radon in the area and the amount of ventilation air available. This system is best used in areas with limited space, such as basements. But it isn't as effective as aeration. It can produce radioactive by-products, which must be properly disposed of. A radiation shield should be installed around the tank, which is one of the most effective radon mitigation systems. Click here to learn more about random mitigation systems.
A radon mitigation system is an investment in the future of a building. Its installation will make it safe for the residents. If a radon mitigation system does not work, the property owner must hire a professional to take the necessary steps to mitigate the problem. If the homeowner is already aware of radon in the house, then this is the best time to implement it. In addition to preventing health risks, a radon mitigation system will also protect the environment.
If the radon mitigation system isn't enough, a contractor can perform a negative-pressure method to pull radon from the soil underneath the foundation. This system is relatively inexpensive and doesn't require a hole in the foundation. Nevertheless, it does have its drawbacks. As with any other mitigation system, it is important to consult a professional to determine the best radon mitigation system for your home. Knowledge is power and so you would like to top up what you have learned in this article at https://en.wikipedia.org/wiki/Radon_mitigation.